Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm

End stop indicator

Standard LF clamp (3/8" to 1/2").

Shaft clamp reversible, clamping range ø16...20 mm

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Ball joint suitable for damper crank arm KH8

Actuator arm, clamping range ø8...16 mm, Slot width 8.2 mm

V-bolt Kit for KH-LF.

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm, Slot width 6.2 mm

Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm

Anti-rotation bracket LF.

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Angle of rotation limiter, with end stop

Form fit adapter, 8x8 mm, for LF..

Mounting bracket

Linkage kit

LF right angle bracket 4-1/2x5-1/2x2-1/2" (HxWxD).

ZG-JSL support plate for EFB(X)

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

Linkage kit, Jackshaft RetroFIT+ Linkage with Belimo Rotary Actuators

LF crankarm adaptor kit (includes ZG-112).

LF crankarm adaptor kit (T bracket included).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (5" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Resistor kit, 50% voltage divider

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Baseplate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 16x10x6.435" [406x254x164 mm] (LxWxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Shaft extension, 1/2", for ZS-300

Shaft extension, 3/4", for ZS-300

Shaft extension, 1", for ZS-300

DC Voltage Input Rescaling Module

Positioner for wall mounting

Positioner for front-panel mounting

Belimo PC-Tool, Software for adjustments and diagnostics

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Connecting cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminal

Connecting cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supply connection

Service tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devices

Gateway MP to BACnet MS/TP

Gateway MP to LonWorks

Gateway MP to Modbus RTU

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount