Integrated thermal energy management and billing made easier than ever
The new range of Belimo Energy Valve™ with the Thermal Energy Meter integrates energy measure and control, delta T management, and IoT-enabled billing in one device. It offers seamless and direct integration to the BMS or IoT-based monitoring platforms. Energy measurement and control with certified energy measurement and billing are united. It's bringing together performance features to save you time and costs
Energy savings you can see - Energy measurement and power control anywhere
Access to the building data from anywhere and the transparency of the ventilation and heating systems are essential for the Lenzerheide Bergbahnen situated in the leading winter Alpine sports region and Switzerland's number one bike destination.
Vast energy savings at the Citizen Plaza in Nashville, TN due to energy valves
Chad Lovell, Operation and Safety specialist at Jones Lang LaSalle, will tell you more in this movie about the implementation of the Energy Valve.
Low delta T syndrome is a common and costly problem in many large facilities worldwide. This was the case for JLL, Commercial real estate agency for the Tennessee State office buildings until the installation of the Belimo Energy Valve. The Citizen Plaza and Andrew Jackson buildings are reaping the rewards of higher delta T with improved occupant comfort, elimination of the district energy plant penalties, along with a savings of 49% in chilled water pumping and over $23,000 a year in chilled water savings.
Bringing together certified metering and precise control in one device
The Belimo Energy Valve™ offers certified energy metering (MID) and pressure-independent control, and delta T management in one device. The delta T manager integrated in the Belimo Energy Valve™ continuously measures the temperature spread and compares it with the user defined fixed limit. If the temperature falls below the limit value, the Belimo Energy Valve™ automatically adjusts the flow rate to remove the overflow. Heating or cooling systems operated with excessive amounts of water, are unable to convert this excess flow into a higher heating or chilling capacity, often resulting in the low delta T syndrome at the plant. Measuring and controlling the temperature spread between flow and return at each heat exchanger, is key to ensuring lowest possible pumping costs. Our integrated logic prevents the occurrence of low delta T at the heat exchanger, while retaining comfort.
Learn from Jon: How to detect and solve the low delta T syndrome.
Reliable certified metering enabling IoT-based billing
Our Energy Valve integrated meters are certified according to EN1434/MID and equipped to incorporate into the BMS seamlessly, also if required, into an IoT-based billing platform. Our non-certified meter options contain Belimo's patented automatic glycol monitoring and compensation feature to ensure power measurements remain accurate, irrespective of glycol concentration. The Energy Valve with the Thermal Energy Meter offers glycol monitoring utilising the on-board advanced logic algorithm to ensure the optimum glycol levels at all times, reducing high pumping costs and eliminating freezing risks.
Simplify planning and commissioning with the Belimo Energy Valve™
Digitally supported workflows simplify your interactions for the entire life cycle of the product – the Belimo Energy Valve™ and Thermal Energy Meter work with the Belimo Assistant apps and web server tool to support the design process, simplify commissioning, make troubleshooting easy, and retains records and certificates as required.
The Near Field Communication (NFC) interface enables easy configuration and maintenance directly from a smartphone using the Assistant app with or without the device powered.
The Energy Valve and Thermal Energy Meter products can be powered using PoE via an Ethernet cable, simplifying installation, avoid wiring errors, and providing a faster, more stable network connection while eliminating the need for a local power supply.
The future of HVAC systems is connected
Connectivity has always been an important feature of our products. The Belimo Energy Valve™ and the Thermal Energy Meter have all common building automation communication protocols on-board ( BACnet IP and MS/TP, Modbus TCP and RTU, and Belimo MP-Bus) and also support M-Bus via a converter. Bus communication can also be used for monitoring and overriding when controlling the Belimo Energy Valve™ using an analogue control signal.
Integration of energy data has never been easier
The Belimo Energy Valve™ and Thermal Energy Meter provide direct integration to the BMS and are equipped to enable 3rd party IoT-based energy monitoring and billing. One device provides all the information needed to control, bill, monitor, and improve the performance of your system.
If you connect your Energy Valve 4 to the Belimo Cloud, it extends the five-year warranty to a seven-year warranty while offering you a host of other benefits. By maintaining a digital twin Energy Valve in the cloud, authorised users can interact with the data directly, or device owners can authorise a third party to provide billing as well as analytical services.
Modular design for a fast meter exchange
The Energy Valves thermal energy meter consists of a sensor module, connected temperature sensors, and houses metering and logic functionalities. Data communication capabilities via Bus and NFC. The sensor module is available as a spare part. Certain countries require periodic replacement for recalibration according to national regulations. The logic module can be disconnected from the sensor module (leaving all cables connected), enabling the lower sensor module to be easily exchanged.
The Belimo Energy Valve™ in heating and cooling applications
The Energy Valve in heating applications
The animation illustrates a Belimo Energy Valve on the supply side of a heating application.
The delta T setpoint in the valve matches the design delta T of the coil, 11° Fahrenheit/6 Kelvin.
As the temperature sensors start to realise a lower differential temperature across the coil, the valve begins to close. The flow slows down, allowing a more efficient heat exchange across the coil and eliminating overflow. Once the valve realises that the delta T is beginning to stabilise, it allows more flow back through the coil and keeps the optimum heat transfer available.
The Energy Valve in cooling applications
In this animation the Belimo Energy Valve set up is on the return side of a cooling coil.
The delta T setpoint in the valve is matching the design delta T of the coil, 15° Fahrenheit/8 Kelvin.
When the temperature sensors detect the delta T has been below the setpoint for a few minutes, the valve begins to close to lower the flow. This enables the heat exchanger to optimise the energy output and eliminate the overflow. As soon as the delta T begins to stabilise, the valve starts opening to keep the designed heat exchange output through the coil constant.
Joerg explains how to increase energy efficiency with the Energy Valve
The Belimo Energy Valve™ offers many integrated functions to perform energy optimisation and make HVAC systems more efficient. Learn how to reduce thermal energy through better leakage rate, pressure independent control, and delta T management.
Awarded the Solar Impulse Efficient Solution Label
The Solar Impulse Foundation granted a portfolio of 1000 innovative solutions that meet high standards of both sustainability and profitability. We are proud to announce that the Belimo Energy Valve™ has been selected to be one of the 1000 solutions awarded the Solar Impulse Efficient Solution Label.
Swisscom IoT Climate Award 2021
The Swisscom IoT Climate Award honours outstanding achievements by companies that contribute to a reduction of CO2 emissions with their IoT solutions. We are proud that the Belimo Energy Valve has won second place with its cloud connection.