Shaft extension 170 mm Ø10 mm for damper shaft Ø 6...16 mm

End stop indicator

Standard LF clamp (3/8" to 1/2").

Shaft clamp reversible, clamping range Ø16...20 mm

Ball joint suitable for damper crank arm KH8, Multipack 10 pcs.

Ball joint suitable for damper crank arm KH8, Multipack 10 pcs.

Actuator arm, clamping range Ø8...16 mm, Slot width 8.2 mm

V-bolt Kit for KH-LF.

Damper crank arm Slot width 8.2 mm, for Ø1.05"

Damper crank arm, Slot width 6.2 mm

Damper crank arm Slot width 8.2 mm, clamping range Ø10...18 mm

Anti-rotation bracket LF.

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Angle of rotation limiter, with end stop

Form fit adapter, 8x8 mm, for LF..

Mounting bracket

Linkage kit

LF right angle bracket 4-1/2x5-1/2x2-1/2" (HxWxD).

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

LF crankarm adaptor kit (includes ZG-112).

LF crankarm adaptor kit (T bracket included).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (5" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Resistor kit, 50% voltage divider

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 330x203x152 mm [13x8x6"] (LxBxH)

Base plate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 406x254x164 mm [16x10x6.435"] (LxBxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 438x222x140 mm [17-1/4x8-3/4x5-1/2"] (LxBxH)

Weather shield, 438x222x140 mm [17-1/4x8-3/4x5-1/2"] (LxBxH)

Shaft extension, 1/2", for ZS-300

Shaft extension, 3/4", for ZS-300

Shaft extension, 1", for ZS-300

DC Voltage Input Rescaling Module

Convert Pulse Width Modulated Signal to a 2...10 V Signal for Belimo Proportional Actuators

Positioner for wall mounting

Positioner for front-panel mounting

Cable conduit connector, 1/2"

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Connection cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminal

Service Tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devices

Gateway MP to BACnet MS/TP

Gateway MP to LonWorks

Gateway MP to Modbus RTU

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount