Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm

Position indicator
for TFB(X)

Standard TFB(X) clamp (1/4" to 1/2").

Ball joint suitable for damper crank arm KH8, Multipack 10 pcs.

Ball joint suitable for damper crank arm KH8, Multipack 10 pcs.

TFB(X) crankarm with 5/16" slot.

TFB(X) crankarm with 1/4" slot.

Damper crank arm Slot width 8.2 mm, for Ø1.05"

Damper crank arm, Slot width 6.2 mm

Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm

Screw fastening kit

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Anti-rotation bracket TF/NKQ/AM/NM/LM.

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Angle of rotation limiter, with end stop

Mounting bracket
for TFB(X)

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (5" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Resistor kit, 50% voltage divider

TFB(X) crankarm adaptor kit (includes ZG-113).

TFB(X) crankarm adaptor kit (T bracket included).

Mounting kit
for TFB(X)

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 330x203x152 mm [13x8x6"] (LxBxH)

Base plate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

DC Voltage Input Rescaling Module

Convert Pulse Width Modulated Signal to a 2...10 V Signal for Belimo Proportional Actuators

Positioner for wall mounting

Positioner for front-panel mounting

Cable conduit connector, 1/2"

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount