Actuator arm for standard shaft clamp

Shaft extension 240 mm Ø20 mm for damper shaft Ø 8...22.7 mm

Standard GK/GM clamp (1/2" to 1.05").

Ball joint suitable for damper crank arm KH8, Multipack 10 pcs.

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.512 in. [13 mm]

Base plate extension for GM..A to GM..

Mounting bracket for AF..

Mounting bracket

Dual actuator mounting bracket.

Mounting bracket

Mounting bracket

Mounting bracket

Linkage kit

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

Mounting kit for linkage operation for flat installation

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Resistor kit, 50% voltage divider

Resistor kit, for -MFT95 actuator in 0...135 Ω control application

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 330x203x152 mm [13x8x6"] (LxBxH)

Base plate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 406x254x164 mm [16x10x6.435"] (LxBxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 438x222x140 mm [17-1/4x8-3/4x5-1/2"] (LxBxH)

Weather shield, 438x222x140 mm [17-1/4x8-3/4x5-1/2"] (LxBxH)

Shaft extension, 1/2", for ZS-300

Shaft extension, 3/4", for ZS-300

Shaft extension, 1", for ZS-300

DC Voltage Input Rescaling Module

Battery, 12 V, 1.2 Ah (two required)

Battery backup system, for non-spring return models

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Feedback potentiometer 2.8 kΩ add-on, grey

Feedback potentiometer 5 kΩ add-on, grey

Feedback potentiometer 500 Ω add-on, grey

Convert Pulse Width Modulated Signal to a 2...10 V Signal for Belimo Proportional Actuators

Auxiliary switch 1 x SPDT add-on

Auxiliary switch 2 x SPDT add-on

Positioner for wall mounting

Cable conduit connector, 1/2"

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Connection cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socket

Connection cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminal

Connection cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supply connection

Connection cable 16 ft [5 m], A+B: RJ12 6/6

Service Tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devices

Gateway MP to LonWorks