Actuator arm for standard shaft clamp (one-sided)

Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

Clamp NM/AM 1/2", 3/4", 1"

Shaft clamp reversible for SM..A, NKQ..A, NMQ..A, clamping range ø10...20 mm

Ball joint suitable for damper crank arm KH8

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm, Slot width 6.2 mm

Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Anti-rotation bracket TF/NKQ/AM/NM/LM.

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Mounting bracket for AF..

Mounting bracket
for AF / NF

Mounting bracket

Mounting bracket

Jackshaft mounting bracket.

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

1" diameter jackshaft adaptor (11" L).

1-5/16" diameter jackshaft adaptor (12" L).

1.05" diameter jackshaft adaptor (12" L).

Mounting kit for linkage operation for flat installation

Shaft extension for 1/2" diameter shafts (3.8" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Resistor kit, 50% voltage divider

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Baseplate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

DC Voltage Input Rescaling Module

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Auxiliary switch 1x SPDT add-on

Auxiliary switch 2x SPDT add-on

Positioner for wall mounting

Positioner for front-panel mounting

Cable conduit connector, 1/2"

Belimo PC-Tool, Software for adjustments and diagnostics

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount