Choose how the valve-actuator combination should be delivered
Would you like a pipe connector?
R8020S.13
Characterised control valve, 2-way, DN 20, Tri-clamp connection, PN 16, ps, Kvs 6.3 m³/h, Fluid temperature -18...100°C [0...212°F]
- List price
- USD 178.50
Choose an existing Project List to add this product:
Show all Projects Lists
You have no existing Project Lists.
Or create a new Project List to add this product:
Design data: Design data
- Actuator selection
- Details
- Downloads
- Accessories
Actuator selection
Details
Specifications
- Pattern
- 2-way
- Kvs
- 6.3 m³/h
- Fluid
- Water, water with glycol/propylene glycol up to max. 60% vol., deionised water, hydrocarbon liquid, mineral oil, silicone oil, synthetic oil.
- Fluid temperature
- -18...100°C [0...212°F]
- Fluid temperature note
-
- At a fluid temperature of -18...2°C, a stem heater or a valve neck extension is recommended.
- The allowed fluid temperature can be limited, depending on the type of actuator. Limitations can be found in the respective data sheets of the actuators.
- Differential pressure
- ∆pmax 350 kPa
- Close-off pressure
- 1400 kPa
- Flow characteristic {Tools}
- Equal percentage
- Leakage rate {Tools}
- Air-bubble tight, leakage rate A
- Pipe connection
- Tri-clamp connection
Downloads
Accessories
