Choose how the valve-actuator combination should be delivered
Would you like a pipe connector?
R531
Characterised control valve, 3-way, DN 32, External thread, G 2", PN 25, ps 1600 kPa, Kvs 16 m³/h, Fluid temperature -10...100°C [14...212°F]
Choose an existing Project List to add this product:
Show all Projects Lists
You have no existing Project Lists.
Or create a new Project List to add this product:
Design data: Design data
- Actuator selection
- Downloads
- Accessories
- Details
Actuator selection
Downloads
Accessories
Mechanical accessory
EXT-OC-ZR532
Insulation shell for valve R5.., DN 32
only for non-condensing applications
ZR-EXT-01
Valve neck extension for ball valve DN 15...50
ZR4532
Pipe connector for ball valve with external thread, DN 32, Rp 1 1/4", G 2"
Electrical accessory
ZR24-2
Stem heater for ball valve DN 15...50, AC/DC 24 V, 20 W
Details
Specifications
- Pattern
- 3-way
- Kvs
- 16 m³/h
- Fluid
- Water, water with glycol up to max. 50% vol.
- Fluid temperature
- -10...100°C [14...212°F]
- Fluid temperature note
-
- At a fluid temperature of -10...2°C, a valve neck extension is recommended.
- The allowed fluid temperature can be limited, depending on the type of actuator. Limitations can be found in the respective data sheets of the actuators.
- Differential pressure
- ∆pmax 200 kPa
- Close-off pressure
- 1400 kPa
- Flow characteristic {Tools}
- A – AB: equal percentage; B – AB: linear
- Leakage rate {Tools}
- A – AB: air-bubble tight, leakage rate A; B – AB: Leakage class I, 1...2% of the Kvs value
- Pipe connection
- External thread
