Choose how the valve-actuator combination should be delivered
Would you like a pipe connector?
R2050-40-S4
Characterised control valve, 2-way, DN 50, Internal thread, Rp 2", PN 25, ps 1600 kPa, Kvs 40 m³/h, Fluid temperature -10...120°C [14...248°F]
For optimum energy efficiency in heating applications, we recommend using our corresponding insulation shells.
The suitable insulating shell can be found in the accessories for this product.
- List price
- 313,00 €
Choose an existing Project List to add this product:
Show all Projects Lists
You have no existing Project Lists.
Or create a new Project List to add this product:
Design data: Design data
- Actuator selection
- Downloads
- Accessories
- Details
Actuator selection
Downloads
Accessories
Mechanical accessory
EXT-OC-ZRN250
Insulation shell for valve R2.., DN 50
only for non-condensing applications
List price: 49,50 €
Your price: ...
ZR2350
Pipe connector for ball valve with internal thread, DN 50, Rp 2", R 2"
List price: 73,30 €
Your price: ...
Electrical accessory
Details
Specifications
- Pattern
- 2-way
- kvs
- 40 m³/h
- Fluid
- Water, water with glycol up to max. 50% vol.
- Flow temperature
- -10...120°C [14...248°F]
- Flow temperature note
-
- At a fluid temperature of -10...2°C, a stem heater or a valve neck extension is recommended.
- The allowed fluid temperature can be limited, depending on the type of actuator. Limitations can be found in the respective data sheets of the actuators.
- Differential pressure
- ∆pmax 350 kPa
- Close-off pressure
- 1400 kPa
- Differential pressure note
- 200 kPa for low-noise operation
- Flow characteristic {Tools}
- Equal percentage
- Leakage rate {Tools}
- Air-bubble tight, leakage rate A
- Pipe connection
- Internal thread
