Actuator arm for standard shaft clamp

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

Clamp NM/AM 1/2", 3/4", 1"

Shaft clamp reversible for SM..A, NKQ.., NMQ.., clamping range ø10...20 mm

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Base plate extension for SM..A to SM../AM../SMD24R

Mounting bracket for AF..

Mounting bracket

Mounting bracket

Mounting bracket

1" diameter jackshaft adaptor (11" L).

1-5/16" diameter jackshaft adaptor (12" L).

1.05" diameter jackshaft adaptor (12" L).

Mounting kit for linkage operation for flat installation

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 16x10x6.435" [406x254x164 mm] (LxWxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Terminal-strip cover for NEMA 2 rating (-T models).

DC Voltage Input Rescaling Module

Battery backup system, for non-spring return models

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Convert Pulse Width Modulated Signal to a 2...10 V Signal for Belimo Proportional Actuators

Auxiliary switch 1x SPDT add-on

Auxiliary switch 2x SPDT add-on

Positioner for wall mounting