Actuator arm for standard shaft clamp

Shaft extension 240 mm Ø20 mm for damper shaft Ø 8...22.7 mm

Anti-rotation bracket EFB(X)/GKB(X)/GMB(X).

Standard GK/GM clamp (1/2" to 1.05").

Damper crank arm Slot width 8.2 mm, clamping range Ø14...25 mm

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Wrench 0.512 in. [13 mm]

Base plate extension for GM..A to GM..

Adapter for auxiliary switch and feedback potentiometer, if shaft clamp mounted below on xMQ..A.., NKQ..A.., GK..A..

Mounting bracket for AF..

Mounting bracket

Mounting bracket

Mounting bracket

Mounting bracket

Linkage kit

Jackshaft mounting bracket.

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

Mounting kit for linkage operation for flat installation

1" diameter jackshaft adaptor (11" L).

1-5/16" diameter jackshaft adaptor (12" L).

1.05" diameter jackshaft adaptor (12" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Resistor kit, 50% voltage divider

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 330x203x152 mm [13x8x6"] (LxBxH)

Base plate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 406x254x164 mm [16x10x6.435"] (LxBxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 438x222x140 mm [17-1/4x8-3/4x5-1/2"] (LxBxH)

Weather shield, 438x222x140 mm [17-1/4x8-3/4x5-1/2"] (LxBxH)

Shaft extension, 1/2", for ZS-300

Shaft extension, 3/4", for ZS-300

Shaft extension, 1", for ZS-300

DC Voltage Input Rescaling Module

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Feedback potentiometer 2.8 kΩ add-on, grey

Feedback potentiometer 5 kΩ add-on, grey

Feedback potentiometer 500 Ω add-on, grey

Convert Pulse Width Modulated Signal to a 2...10 V Signal for Belimo Proportional Actuators

Auxiliary switch 1 x SPDT add-on

Auxiliary switch 2 x SPDT add-on

Positioner for wall mounting

Positioner for front-panel mounting

Cable conduit connector, 1/2"

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount