Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

LMB(X) clamp (3/8”)

LMB(X) clamp (1/2”).

Standard LMB(X) clamp (5/8”).

LMB(X) clamp (3/4").

Damper crank arm Slot width 8.2 mm, clamping range ø14...25 mm

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm, Slot width 6.2 mm

Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Anti-rotation bracket TF/NKQ/AM/NM/LM.

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Adapter for auxiliary switch and feedback potentiometer, if shaft clamp mounted below on xMQ..A.., NKQ..A.., GK..A..

Mounting bracket for AF..

Mounting bracket

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

Shaft extension for 1/2" diameter shafts (3" L).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (5" L).

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Base plate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Terminal-strip cover for NEMA 2 rating (-T models).

Battery, 12 V, 1.2 Ah (two required)

Battery backup system, for non-spring return models

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Feedback potentiometer 15 kΩ gray

Feedback potentiometer 2.8 kΩ add-on, grey

Feedback potentiometer 5 kΩ add-on, grey

Feedback potentiometer 500 Ω add-on, grey

Auxiliary switch 1 x SPDT add-on

Auxiliary switch 2 x SPDT add-on

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount