Electr. 2-way PI-CCV Belimo Energy Valve™ fail-safe, AC/DC 24 V, BACnet IP, BACnet MS/TP, Modbus TCP, Modbus RTU, MP-Bus, DN 32, Internal and external thread, Rp 1 1/4"G 1 1/2", PN 25, ps 1600 kPa, V'nom 1.67 l/s, Fluid temperature -10...120°C [14...248°F]
- List price
- 9 505,00 PLN
Design data: Design data
- Product videos
T-piece with thermowell, DN 32
Grommet for RJ connection module with clamp
Pipe connector, DN 32, Rp 1 1/4", G 1 1/2"
Insulation shell for EPIV / Belimo Energy Valve™, DN 32...50
only for non-condensing applications
Valve neck extension for ball valve DN 15...50
Pipe connector for ball valve, DN 32, G 1 1/4", with internal thread
Converter Bluetooth / NFC
Sensor module thermal energy meter DN 32
Thermowell Stainless steel, 80 mm, G 1/2", SW27
The multifunctional Belimo Energy Valve™
Transparent energy monitoring with the Belimo Cloud.
• Quick and certain dimensioning as well as simple commissioning
• Energy-saving through automatic, permanent hydronic balancing
• Correct volume of water despite differential-pressure changes and partial loads
• Efficient operation ensured through the Delta-T Management
Belimo Energy Valve™ - Reference: Citizen Plaza, Nashville, USA
Low Delta-T syndrome is a common and costly problem in many large facilities worldwide. This was the case for JJL, commercial real estate agency for the Tennessee state office buildings until the installation of the Belimo Energy Valve™.
Belimo Energy Valve™ - Reference: Bouygues Construction, Guyancourt, France
World's first: Building renovation to receive triple certification.
Bouygues defined this triple certification as an objective of the project at the time of planning. Among other things, an innovative air conditioning system with variable refrigerant flow (VRF) was developed. The Belimo Energy Valve™ has a central role to play in the project.
Belimo Energy Valve™ - Reference: Lenzerheide Bergbahnen, Switzerland
Access to the building data from anywhere and the transparency of the ventilation and heating systems are essential for the Lenzerheide Bergbahnen situated in the leading winter Alpine sports region and Switzerland's number one bike destination.
Belimo Energy Valve™ - Reference: District Hospital Ludmillenstift, Meppen, Germany
Years of expansion at the Ludmillenstift Hospital resulted in an HVAC system that just could not cope. The introduction of Belimo Energy Valves™ significantly reduced the water flow rate of the heating network, resulting in smart, transparent, and energy-efficient load-dependent heating and cooling systems – while improving comfort and keeping energy consumption stable.
Belimo Energy Valve™ - Reference: University of Bremen, Germany
Due to the strong growth of hydraulic networks, the operating states are becoming increasingly unclear. The Belimo Energy Valve™ was developed to counteract this. It combines the functionality of conventional differential pressure controller, heat meters and control valves in one device. In addition, commissioning, configuration, diagnostics and monitoring can be completed quickly using the Belimo Assistant App.
- Close-off pressure
- 1400 kPa
- Cold and warm water, water with glycol up to max. 60% vol.
- Pipe connection
- Internal and external thread
- Control type
- BACnet IP
- BACnet MS/TP
- Modbus TCP
- Modbus RTU
- DC 2...10 V
- DC 0.5...10 V
- Hybrid (communicative / analog)
- Degree of protection
- IP54, Logic module: IP54 (with grommet A-22PEM-A04) Sensor module: IP65
- Electrical connection
- Fail-safe function
- Manual override
- With push-button
- Power consumption (holding)
- 6.5 W
- Power consumption (running)
- 15 W
- Running time (fail-safe)
- 35 s
- 20 Nm
- Voltage AC/DC
- AC/DC 24 V